Vice specially designed for precision tooling, which allow a high flexibility af use thanks to their minimum dimensions and to the possibility of beign mounted either on a surface, or on their side, or vertically. Both the body and the slide are made from high resistance cast iron. The sliding surfaces are HRC 45 hardened. The jaws are added peices made from HRC 58 hardened steel. The special construction of the moving slide can transform part of the horizontal clamping force into a vertical force in order to prevent the slide unit from lifting after clamping; by such a way, the parallelism between jaws is granted, and this permits to reduce the oscillation of the piece to be machined. The wearable pieces, such as screw and sliding guides, are protected by special cases suitable to avoid any contact with chips or metal particles, thus reducing maintenance and cleaning operations, so as to grant a long working life to the vice.
HB vices are equipped with a multiplier, which permits to get a high clamping force by a few key turns (2 to 3), hence less idle time and a higher job efficiency. We chose to realize this multiplier mechanically because, unlike the hydraulic models, the mechanical multiplier gives a higher reliability and a longer working life, hence cost reduction.

inapoi - accesorii pt. masini unelte

Pentru mai multe informatii va rugam  transmiteti-ne datele dvs si pozitiile care va intereseaza.

INFORMARE SI DOCUMENTARE -PE DOMENIU PREZENTAT-
ZILNIC- IN TIMP REAL, LA TELEFON: 0744 305595; EMAIL: masiniunelte.cnc@gmail.com
-IN HALA SEPROCOM
-LA SEDIUL FIRMEI DV.

Address: Bucharest , Romania, str.Masina de paine nr. 3 bl.2, sc.2 ap.48 sector 2 MOBILE 0040-744-305595 PHONE/FAX 0040-21-2428043 email: masiniunelte.cnc@gmail.com